如何在Synology NAS 故障時在電腦上還原資料？

我有一隻從Synology DS413j拆出嚟既Hardisk，然後我將佢插入ORICO既6619US3 Docking度，但無論係Win定Mac都Read唔倒Hardisk入面既野，請問是否Fomat不對定係 ...

Yes. If you google around you can find some drivers that can read ext3/4 volumes under windows. Some of them can only read them others are able also to write.

The only tool I found that could correctly read a RAID1 Synology disk ReclaiMe and as said above that is 200 USD for a working version.

Recover data using a PC. Make sure your PC has sufficient drive slots for drive installation. Remove the drives from your Synology NAS and install them in ...

確認您的電腦具備足夠的硬碟插槽以供安裝硬碟。 將硬碟從Synology NAS 取出，並安裝到電腦。若使用RAID 或SHR 配置，您必須將所有硬碟(Hot Spare ...

To read a NAS filesystem on a Windows PC you need to: Pull the disks out of the NAS. Connect the disks to the Windows PC directly using SATA cables.

I was asking on how to access Synology NAS drive directly as external drive in Windows. I just replaced a drive on my NAS and now trying to obtain the data.

Hi I had a Synology mess up. I took the drive out and plugged it into a Windows PC using a SATA cable. I see it as online in the disk management

The RAID layer manages the low-level read/write of data to the hardware storage, and the drives themselves control the physical read/writing.

In the unfortunate event of a Synology NAS Hardware failure, you can still recover data from the Hard Drive RAID array using a PC.